Source rivets for diy vias

Good day. Once I read on useful advice on where to find the rivet vias.

2015-08-12 10.43.19

I recall my previous article about diy vias where I used copper wire from the twisted pair.

[adsense type=”banner”]
Next will photo as associative serie:

2015-08-12 10.43.01


2015-08-12 12.03.32

2015-08-12 12.03.48


Yes this is a leg of processor. Dimensions: Overall length 3,2mm diameter legs 0,4mm diameter cap of 1 mm.


2015-08-12 10.42.15

That’s how many legs I got from one processor.

2015-08-12 11.45.20

So it looks like on the board in the photo, it is not yet soldered.

And the box in which I keep all this.

2015-08-12 10.43.19


Made from the top of a plastic PET bottle glued to a piece of polystyrene with a rubber glue.


2015-08-12 08.30.06


2015-08-12 10.46.53


2015-08-12 10.47.04


That’s all. Everyone goodbye.

Leave a Reply